Switching The Top Burner On And Off; Switching The Oven On And Off - Angelo Po 1N1TPGV Manual De Uso

Lighting
Turn on the gas supply tap.
1)
Press the knob (A) and turn it anti-clockwise
2)
(pos. 1) to light the pilot light.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple.
Turn the knob (A) anti-clockwise (pos. 2) to
4)
turn on the burner.
Press the knob (A) and turn it gradually anti-
5)
clockwise to adjust the power of the fl ame
down to the minimum setting).
Turning off
Turn the knob (A) clockwise (pos. 1) to turn off
1)
the burner. The pilot light will remain on to
allow the burner to be re-lit.
Press the knob (A) and turn it clockwise (pos.
2)
3) to turn off the pilot light.
Turn off the tap to ensure safety.
3)
Lighting
Important
At fi rst switch-on, preheat as appropriate.
Turn on the gas supply tap.
1)
Press the knob (A) and turn it anti-clockwise
2)
(pos. 1) while keeping button (B) pressed, to
GB
light the pilot light.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple. The pilot light can
also be lit by hand through the hatch (C).
Press the knob (A) and turn it anti-clockwise
4)
(pos.2) to between the minimum and maxi-
mum temperature and wait for the warm-up
time before using the oven (see table).
Temperature °C
Time in minutes
3320110_ut_GB_rev.1

SWITCHING THE TOP BURNER ON AND OFF

SWITCHING THE OVEN ON AND OFF

Min
100 140 180 210 240 270 300
6' 8' 10' 12' 14' 16' 18'
A
A
Max
- 10 -
A
3
B
C
1
2
3
1
2
A
ENGLISH