Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
MAX/MIN
When the "MAX/MIN" button
the Maximum, Minimum and Average values as the meter continues
to take samples.
1. When measuring, press "MAX/MIN" button
the Maximum value (MAX), Minimum value (MIN) and Average
value (AVG). If a new Maximum, Minimum or Average occurs, the
display will update with the new value.
2. Press "MAX/MIN" button
normal measuring mode.
RELATIVE MODE
When the REL/LPF button
relative value on the main display and real time measurement on the
secondary display. Press the REL/LPF button
measuring mode.
LOW-PASS FREQUENCY
For AC voltage readings of high frequency motors, long press the
REL/LPF button
more accurate reading. Long press the REL/LPF button
to normal measuring mode.
NON-CONTACT VOLTAGE TESTING
With the meter powered on, pproach the conductor under test
leading with the non-contact voltage sensor
Voltage Testing Indicator 15
voltage is detected by the non-contact voltage sensor.
CONNECTING TEST LEADS
Do not test if leads are improperly seated. Results could cause
intermittent display readings. To ensure proper connection, firmly
press leads into the input jack completely.
CORRECT
8
FUNCTION BUTTONS
8
8
is pressed, the meter will show the
11
and meter will apply a low pass filter to ensure a
11
delivers visual warning signals when AC
OPERATING INSTRUCTIONS
is pressed, the meter keeps track of
for more than one second to return to
16
to toggle between
8
to return to normal
11
to return
11
. The
Non-contact
INCORRECT
Tabla de contenido
