Intended Use; Technical Data; Before Starting The Equipment - EINHELL AQUINNA Manual De Instrucciones

Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore battery + charger options at
einhellUSA.com

3. Intended use

Range of applications:
•
For irrigating and watering landscaped areas,
vegetable beds and gardens
•
For operating lawn sprinklers
•
With coarse filter for drawing water from
ponds, streams, rainwater butts, rainwater
cisterns and wells
•
For supplying service water
Transport media:
•
For the pumping of clear water (freshwater),
rainwater and mild suds/service water.
•
The maximum temperature of the fluid
must not exceed 95°F (+35°C) if the unit is
operated permanently.
•
Do not use the equipment to pump
inflammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acids,
alkalis, silo seepage etc.) as well as liquids
with abrasive substances (sand) must
likewise be avoided.
•
This equipment is not designed to convey
drinking water.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_AQUINNA_USA_SPK7.indb 12 Anl_AQUINNA_USA_SPK7.indb 12
EN

4. Technical data

Voltage ..................................36 V
Pressure connection ................. 1" NPT (female)
Intake connection ...................... 1¼" NPT (male)
Water temperature maximum ........... 95°F (35°C)
Protection .....................................................IPX4
Pump setting 1
Delivery rate maximum ... 13.21 gal/min (50 l/min)
Delivery head maximum ............... 55.8 ft (17 m)
Delivery pressure maximum ..... 24.7 psi (1.7 bar)
Suction height maximum ................. 26.2 ft (8 m)
Pump setting 2
Delivery rate maximum ... 13.21 gal/min (50 l/min)
Delivery head maximum ............... 85.3 ft (26 m)
Delivery pressure maximum ..... 37.7 psi (2.6 bar)
Suction height maximum ................. 26.2 ft (8 m)

5. Before starting the equipment

The equipment is supplied without batteries
and without a charger.
As a basic principle, we recommend the use of
a preliminary fi lter and a suction set with suction
hose, intake cage and non-return valve, in order
to prevent long priming periods and unnecessary
damage to the pump as a result of stones and
solid foreign bodies.
To ensure that the connections provide optimum
performance without any leaks, the adapter
connections must be sealed using PTFE sealing
tape.
•
Make sure that the male thread is clean
•
Affix the PTFE sealing tape in the direction of
the thread (clockwise)
•
Keep the PTFE sealing tape under tension
when affixing it
•
The layers of the PTFE sealing tape should
overlap by half in each case
•
Once the adapter has been tightened, do not
twist it back again (risk of leakage)
- 12 -
(2x18 V)
23.01.2020 15:10:28 23.01.2020 15:10:28