Switching On/Off - Hama LiberoBuds Instrucciones De Uso

4. Switching on/off

Remove the two headphones simultaneously from the charging box . Both earphones switch
ON
on automatically and start the pairing process . The announcement "Power on" is heard .
Alternative:
To switch them off, simply place the earphones back in charging box . Ensure that the
OFF
earphones are inserted into the correct sides, using the L/R markings as a guide .
Alternative:
5s
"Power off"
Note – Automatic switch-off of the earphones
The earphones are equipped with an automatic switch-off mechanism . If there is no connection to your
device within 5 minutes, they switch off automatically .
Press the MFB button (5) on the left and right
2-3s
earphones for approx . 2-3 seconds until you hear the
announcement "Power on" .
With the earphones switched on, hold the MFB button (5) on the
left or right earphone down for approx . 5 seconds until you hear
a signal tone . The status LED (4) briefly lights up red and the
announcement "Power off" is heard .
OFF
zZz
5 min
ON
"Power on"
STANDBY
3