Machine Components; Machine Setup - Nobles Integrity Manual Del Operador

OPERATION

MACHINE COMPONENTS

1
14
13
8
15
10
1. Twist Grips
2. Adjustable Handle Release Lever
3. Safety Lock Button
4. Circuit Breaker Button
5. Power Cord Hook
6. Cord Grip
7. 23 m (75 ft) Power Cord
8. Motor Cover
9. Rear Wheels
10. Pivoting Caster
11. Flexible Pad Driver
12. Burnish Pad
13. Pad Pressure Meter
14. Pad Pressure Adjustment Knob
15. Dust Bag Compartment Cover
10
3
4
2
6
5
7
9
11
12
Home Find... Go To..

MACHINE SETUP

Carefully check carton for signs of damage. Report
damages at once to carrier.
1. Select and install recommended pad that best
meets your cleaning needs.
NOTE: Proper pad selection is important for best
results. See your authorized distributor to assist you in
choosing the right pad for your specific cleaning
needs.
FOR SAFETY: Before leaving or servicing machine
unplug cord from wall outlet.
2. To install pad, tilt machine back on wheels until
machine is resting on handle.
3. Remove yellow centerlock by turning
counterclockwise.
4. Place selected pad on flexible pad driver and
replace centerlock. Be certain centerlock is tight
(Figure 1).
FIG. 1
5. After pad is installed return machine to upright
position.
6. Check to ensure dust bag is installed (Figure 2).
FIG. 2
PAD
CENTERLOCK
DUST BAG
Integrityt (09–02)