Orbegozo DS 74160.70 BL Manual De Instrucciones página 14

DS 74160.70 BL/N
1. Before installation, turn the unit off and unplug it from the mains.
2. The cooker hood should be place at a distance of 65-75cm above the cooking surface for best effect.
3. After decide the cooker hood height, measure the position of the holes for hanging hood and inner
chimney bracket. Drill 4 holes, 2 for inner chimney bracket and 2 for hanging the hood. Place the wall
plugs and screw the screw to hang the hood not to the bottom. Hang the hood and screw the screws
until the bottom. Screw the inner chimney bracket in its position.
4. Place the exhaust pipe in air outlet of the hood, on the top. Adjust the exhaust pipe with a flange.
5. For better assemble of the hood, you can fix to the wall with 2 inner screws. Remove the filter and mark
the screw's position on the wall. Take down the hood and drill the holes, place the wall plugs and hang
the hood again. Screw the hood to the wall with these security holes.
14