Orbegozo DS 74160.70 BL Manual De Instrucciones página 13

DS 74160.70 BL/N
• Exhaust air should not be sent by conductors used to
evacuate fumes from equipment powered by gas or
other fuel.
• The minimum distance between elements of cooking and
the bottom of the hood must be at least 65cm if the
hood is installed on a gas cooking element. If the
instructions for installation of gas cooking element to
indicate a greater distance, should be taken into account.
The distance of 65cm cannot be reduced.
• The regulations regarding air evacuation must be
respected.
NOTICE
1. Thank you for choosing our cooker hood. Please read the instruction manual carefully before use.
2. The installation work must be undertaken by a qualified and competent fitter.
3. The manufacturer disclaims all liability for any damage or injury caused as a result of not following
instructions for installation contained in the following text.
The cooker hood is used on 220-240V~50Hz.
FEATURE
1. The cooker hood uses high quality materials, and is made with a streamlined design.
2. Equipped with a large power low noise electric motor and centrifugal leaf, it produces strong suction, low
noise, non stick grease filter and easy to clean.
3. Special wind tunnel construction and oil collector design, free dirt will be absorbed in a second.
INSTALLATION
Outside vent
If you have an outlet to the outside, your cooker hood can be connected as below picture by an extraction
duct.
13