Before Use; Parts And Components - cecotec Conga THUNDERBRUSH 560 Manual De Instrucciones

Ocultar thumbs Ver también para Conga THUNDERBRUSH 560:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
ENGLISH
Do not use any accessory that has not been recommended by
Cecotec, as they might cause injuries or damage.
This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Do not use the device if it has been dropped or if there are any
visible signs of damage.
Do not use the appliance to vacuum lighted matches, cigarette
ends or hot ash.
Always remove the plug from the power sock before opening
the appliance.
Do not use the appliance to vacuum liquids.
The appliance is not intended to be used by children under the
age of 8. It can be used by children over the age of 8, as long as
they are given continuous supervision.
This appliance is not intended to be used by persons with
reduced physical, sensory, or mental capabilities, or lack
of experience or knowledge, unless they have been given
supervision or instruction concerning the use of the appliance
in a safe way by a person responsible for their safety, and
understand the hazards involved.
Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when the
appliance is being used by or near children.

2. PARTS AND COMPONENTS

Fig. 1
1.
Power button
2. Handle
3. Extendable metallic hose
4. Dust tank
5. Suction nozzle
6. Accessory for corners
7.
Accessory for furniture
8. Wall bracket
12
CONGA THUNDERBRUSH 560

3. BEFORE USE

Take the product out of the box.
Clean the outside and inside of the machine with a damp cloth and wipe dry.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
Unroll the power cord completely and connect it to an earthed power outlet.
Product assembly.
Unplug the unit from the power supply.
Introduce the end of the hose into the product's main body.
Fix the suction nozzle to the other end of the hose.
4. OPERATION
Press the power switch to turn the appliance on.
Adjust the angle between the brush and the body by rotating the handle.
Press the power button again in order to switch the appliance off.
Vacuuming
The suction nozzle includes 2 positions:
Fig. 2
Position 1: hard floors (extended bristles).
Fig. 3
Position 2: carpets (retracted bristles).
Hard floors
Carpets
To clean sofas, armchairs, furniture, etc., use the device as a handheld vacuum cleaner. To do
so, you just have to remove the extendable metallic tube and introduce any of the accessories
directly into the main body.
Fig. 4
Emptying and cleaning dust tank
Disconnect the appliance from the power supply.
Gently pull from the tabs located in the bottom part of the product's body to open the hatch.
Empty the dust inside the dust tank.
Clean the dust tank following the "Cleaning and maintenance" section.
ENGLISH
CONGA THUNDERBRUSH 560
13

Hide quick links:

Tabla de contenido
loading

Tabla de contenido