Ottobock 50A8 Omo Immobil Sling Instrucciones De Uso página 11

Tabla de contenido
2) Place the shoulder strap diagonally over the contralateral (intact) shoul-
der. Tighten the shoulder strap until the arm is in wished position (fig. 2).
3) Close the waist strap (fig. 3). If required the straps can be shortened.
Place the shoulder pad in desired position.
3.2 50A9 Omo Immobil Sling, abduction:
Adaptation to the left body side:
Open the closure of the waist strap. Remove the abduction wedge from the
arm loop and fix it with the two-sided Velcro fastener on the opposite side
(mirror image) (fig. 4). Open the shoulder strap and turn it in closing direction.
Application of the orthosis:
1) Open the straps. Insert the arm into the loop. The elbow should be
positioned in the closed angle of the arm loop. Place the waist pad on
the hip of the affected arm so that the anatomically shaped end points
forwards. Adapt the Velcro fasteners for upper elbow and thumb (fig. 5).
2) Place the shoulder strap diagonally over the contralateral (intact) shoul-
der. Close the waist strap (fig. 6). Adjust the length of shoulder and waist
strap. If required the straps can be shortened. Place the shoulder pad
in desired position.
The position of the shoulder joint orthosis can be adjusted to
INFORMATION
external and internal rotation by shifting the abduction pad along the hip.
6 Instructions for Care
6.1 Material
The shoulder joint orthosis consists of a breathable, textile-covered foam
avoiding skin irritations. Shoulder as well as waist straps are made of velour
(polyamide). The abduction pad of Omo Immobil Sling, abduction consists
of foam (45kg/m³) and is provided with a Velcro velour cover.
Latex Safe: To our knowledge this product includes no natural
INFORMATION
rubber latex.
6.2 Cleaning
Washable in lukewarm water with mild detergent. Wash out thoroughly
and air-dry.
11
Tabla de contenido
loading

Este manual también es adecuado para:

50a9 omo immobil sling

Tabla de contenido