VP 8500
purified water with less calcium particles. After it, close the filling cap. The max capacity of water
tank is 1.8L, the water level shall not be exceeded the MAX mark.
Note: If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled
water.
2. Replace the detachable water tank properly.
Note: If the water tank is not properly placed, the iron does not produce any steam.
3. Put the iron on the steam station iron's thermal insulating cushion.
4. Connect the plug to wall outlet, one "D" sound of buzzer can be heard and the temperature
indicator starts to illuminate.
5. Turn temperature dial to your desired setting, which is depended on the fabric of garment, refer to
IRONING TIPS latter. The soleplate starts to be heated up and the temperature indicator begins to
flash.
6. When the temperature indicator changes from flashing to illuminating, it means the selected
temperature is reached and the steam is ready for ironing.
Note: During ironing, the temperature indicator goes on from time to time. This indicates that the iron is
heating up to the set temperature.
Note: The system may occasionally produce a pumping sound during steam ironing. This is normal and
tells you that water is pumped into the soleplate.
7. Press the steam trigger to release steam for ironing.
Caution:
7.1 Do not touch hot soleplate at any time before cooling down!
7.2 Never direct the steam at people!
7.3 The supply cord may become hot during a long ironing session.
7.4 The appliance may not release steam if appropriate soleplate temperature has not achieved or
correct temperature setting has not been selected. (There is no steam released under temperature
setting 1 and 2.)
7.5 The water tank may need to be refilled if the pump produces larger noise.
8. After ironing, you can put the iron the thermal insulating cushion. Remove the plug from the wall
socket. But the soleplate is still hot, never touch it with hand, place it on the thermal insulating
cushion until it cools down completely.
14