SKF TKRT 10 Instrucciones De Uso página 11

• Once the correct mode has been selected, press and hold the "MEAS"
button to start measuring.
Record a measurement:
• Keep the "MEAS" button pressed.
• Press the "MEM" button once to record a measurement.
MAX measurements, MIN measurements, AVG measurements and
DATA measurements can be stored into a memory set.
The data number will then increase by one.
Retrieve a measurement:
• Press the "MEM" button to visualize the next measurement stored.
MAX measurements, MIN measurements, AVG measurements and
DATA measurements are available.
• Press and hold the "MEM" button to switch to next Data Set.
10 selectable data sets are available from DATA 0 to DATA 9.
Designation
RPM
rpm
HZ
M/M
I/M
F/M
Y/M
REV
M
In
FT
Yd
SKF TKRT 10
Description
Non-Contact revolutions per minute measurements
Contact revolutions per minute measurements
Non-Contact /Contact frequency measurements
Contact Meter per minute measurements
Contact Inch per minute measurements
Contact Feet per minute measurements
Contact Yard per minute measurements
Revolution measurements
Length measurements in Meters
(Using the largest diameter wheel)
In Length measurements in Inches
(Using the largest diameter wheel)
LT Length measurements in Feet
(Using the largest diameter wheel)
Yd Length measurements in Yards
(Using the largest diameter wheel)
9