cascade corporation 35A Manual Del Usuario página 6

I
NSTALLATION
Truck Requirements
Truck Relief Setting
140 bar Recommended
240 bar Maximum
Truck Flow Volume
35A
Cascade Integral Sideshifters are compatible with SAE 10W
➀
petroleum base hydraulic fluid meeting Mil. Spec. MIL-0-5606
or MIL-0-2104B. Use of synthetic or aqueous base hydraulic
fluid is not recommended. If fire resistant hydraulic fluid is
required, special seals must be used. Contact Cascade.
Flow less than recommended will result in slow sideshift speed.
➁
Flow greater than maximum can result in excessive heating,
➂
reduced system performance and short hydraulic system life.
Recommended
Hydraulic Supply
The Integral Sideshifter requires the hydraulic supply
arrangement shown below. All hoses and fittings should
be No. 6 with 7 mm minimum ID.
5
➀
Min. Recommended
➁
4 L/min. 7.5 L/min.
GA0157.eps
Max.
➂
12 L/min.
A
Mast Single Internal Reeving
A
GA0158.eps
6812836 EN