CN
mm
2.4
3.2
CAP
3
3.2
/
PG-
4
4
Stinox PG-
4
CAP
4.8
5
4.8
5
4.8
5
PG-
PG-
6
BULB-TITE
®
(mm)
4
5.2
6.3
BULB-TITE
®
(mm)
6.3
/
/
*
**
725 9290
190
17/18*
CAP
17/18*
®
®
Stinox
17/24
PG-
PG-
CAP
CAP
17/24
®
®
/
PG-
17/27
PG-
17/29
®
CAP
®
PG-
17/29
/
17/32
G-Bulb
17/36*
17/36*
/
17/26 BT*
/
17/32 BT*
/
/
17/42 BT**
21**
1774600
19**
1.7
Start-Up
Before starting the riveting tool, read and observe the operating instructions and safety
1723000
information and keep in a safe place.
1723000
•
Insert fully charged battery in correct position into riveting tool.
•
Select nosepiece from Table 1.6 and screw on (17/32 in working position).
1723300
Caution!
1723300
The air inlets for the motor should not be obstructed; do not insert any objects
into them.
1723400
1723500
1.7.1 To attach spent mandrel container
1723500
•
Fully screw on spent mandrel container (No. 47) by turning clockwise.
1723600
1723700
1723700
1.7.2 To set a blind rivet
•
Press the yellow trigger button to start the riveting sequence.
•
The jaw assembly automatically moves back into the initial position when the yellow trig-
2953700
ger button is released.
3585900
•
Eject the spent mandrel into the spent mandrel container (No. 47) by tilting the tool to the
rear or through the nosepiece (No. 1-15) by tilting the tool forward.
2953800
•
The riveting tool is equipped with an overload protection function. When overload-
ed, the riveting procedure is interrupted and the red indicator light comes on. In this
case, you must release the yellow trigger button to allow the riveting tool to return to its
initial setting.
3248100
•
The battery maintains a relatively constant power output until it suddenly drops off so that
only 2-3 more blind rivets can be set. This ensures that the jaw assembly can always
return to its initial position after the yellow trigger button has been released.
GB
23