Tabla de contenido
1
2
26
1 2
Basic Operation
Turning Power On or Off
Press the PWR (Power) button to turn on the
unit.
The opening screen appears automatically.
Note: The unit can be turned on by pressing
any button on the unit except the MUTE,
OPEN/CLOSE and
buttons.
Press the PWR (Power) button again to turn off
the unit.
Notes: • The IVA-M700R/CVA-1005R draws
minimal current even when its power
switch is turned off. If the switched
power (ignition) lead of the IVA-
M700R/CVA-1005R is connected
directly to the positive (+) post of the
vehicle's battery, the battery may be
discharged. If this lead is unswitched,
it must be disconnected from the
battery post should the vehicle be left
unused for an extended period of
time.
An SPST (Single-Pole, Single-Throw)
switch (sold separately) can be
added to simplify this procedure.
Then, you can simply place it in the
OFF position when you leave the
vehicle. Turn the SPST switch back
ON before using the IVA-M700R/
CVA-1005R. For connecting the
SPST switch, refer to the Installation
manual.
• Some operation of the unit cannot be
performed while the vehicle is in
motion. In this case, be sure to first
stop your vehicle and apply the
parking brake, then perform the
operation.
English
(ANGLE)
Tabla de contenido
