Taurus ALPATEC CA-2002 II Ter Manual De Instrucciones página 11

- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance unattended while in use.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- WARNING: Do not sleep while using this
appliance, as there is risk you could be harmed.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the appliance is level with respect
to the floor.
WALL-MOUNTED OPTION
- Remove the adjustable foot from the appliance.
To do so, press the two catches which support
the swivel pins of the plate with regard to the
appliance body.
- Use the adjustable foot as a template for ma-
king the two mounting holes on the wall.
- Insert the plugs (not included) in the wall.
- Place the adjustable foot in the wall and screw it
into the plug (screws not included).
- Fit the appliance body into the two catches
which support the swivel pins of the adjustable
foot.
- In the event that the appliance is mounted on a
bathroom wall, position it in such a way that the
socket, power supply cable, switches or other
controls are not within the reach a person in the
bath, shower or at the wash-hand basin.
- In the event of a wall mounting, the height from
the floor miust be a minimum of 1.50m.
- Ensure that the appliance is properly and safely
fixed in his working position with screws. To
avoid damaging the appliance, on recommend
to use only the holes specifically made by the
manufacturer.
DISASSEMBLY OF THE WALL-MOUNTED
- Unhook the appliance from the adjustable foot.
To do so, press the two catches which support
the swivel pins of the adjustable foot.
- Using a screwdriver, remove the screws until
the adjustable foot can be unhooked from the
wall.
- Fit the appliance body into the two catches
which support the swivel pins of the adjustable
foot.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the selection
control.
- Select the appliance function desired.
- Turn the thermostat control to the desired tem-
perature position.
FAN FUNCTION:
- Select the fan position.
- Check that the thermostat button is set to the
maximum.