cecotec CONGA 1790 ULTRA Manual De Instrucciones página 40

ENGLISH
The robot will carry out a cleaning cycle under Auto mode and then will return to the starting
point.
Press the room cleaning button on the remote control or on the App.
Fig. 31
To ensure an efficient cleaning of the room, close the door or use the magnetic.
Suction power level function
Press the power level button on the remote control in order to control the robot's suction
power during the cleaning process. There are 3 suction power levels: Turbo, Normal and
Eco. The power level function can also be turned off if you wish to use the Wet & dry tank for
scrubbing only.
Fig. 32
Scrubbing intensity levels function
Press the scrubbing levels button on the remote control to adjust the water level during the
scrubbing process. There are 3 water levels: High, Medium or Low. The scrubbing intensity
function can also be turned off if you wish to use the Wet & dry tank for sweeping only.
Random mode
The robot will start cleaning randomly and will return to the charging base smartly when it
runs out of battery. The robot will not create maps under this mode.
This mode can be activated from the App.
Manual mode
The robot can be moved manually using the direction buttons on the remote control or on the
App.
Magnetic Strip
Use the magnetic strip to delimit the cleaning area so the robot is not able to access to certain
areas.
Cleaning scheduling
This robot includes schedule settings in order for you to customize the cleaning cycles. The
robot can be scheduled through the remote control or through the App (only models that
feature App).
Note: Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
Setting the remote control's time
Press the clock button on the remote control. Digits will start blinking.
Select the current day of the week by pressing the upwards and downwards buttons.
40