Swing Operation; Economy Operation - Fujitsu ABYG45LRTA Manual De Funcionamiento

Ocultar thumbs Ver también para ABYG45LRTA:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button.
Each time the SWING button is pressed, the swing operation will change in the following
order.
Up/down swing operation
Swing operation stops
To stop SWING Operation
Press the SWING button and select STOP.
Airflow direction will return to the setting before swing was begun.
About SWING Operation
To select up/down swing operation
l
The type of operation
Cooling/Dry
Heating
Fan
To select left/right swing operation
l
The type of operation
Cooling/Dry
Heating
Fan

ECONOMY OPERATION

Begin air conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button.
The ECONOMY indicator lamp (green) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button again.
The ECONOMY indicator lamp (green) will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY operation is approximately 70% of normal air conditioner operation for cooling and heating.
If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
l
During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
l
ECONOMY operation is selected by pressing the ECONOMY operation button.
When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
l
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
En-12
Left/right swing operation
Up/down/left/right swing operation
Range of swing
1 to 4
3 to 5
1 to 5
Range of swing
1 to 5 (All range)
1 to 5 (All range)
1 to 5 (All range)
The SWING operation may stop temporarily when the air conditioner's
fan is not operating, or when operating at very low speeds.
The SWING operation may stop temporarily when the air conditioner's
fan is not operating, or when operating at very low speeds.
Tabla de contenido
loading

Tabla de contenido