previously set. The remote control will emit the control codes of the buttons that
were previously set in the correct order. This simplifies operation.
For example: Switch on the power of the TV set
1.Press the "TV" button. Select the home appliance that you wish to set.
2.Press and hold the "Volume+" and "Channel+" buttons at the same time until
the indicator is switched on. Then release both buttons (the indicator light will
switch off and then on again).
Enter code 9991 manually. The indicator light will light up to indicate the
start-up of M1 setting. (9992 is the corresponding code for M2 setting).
3.Press the "POWER" button to indicate that TV power data has been entered
into M1. Press the TV/AV button to add another set of codes (every time you
press a button, the indicator light will flash once).
4.Press the "TV" button. The indicator light switches off. Exit settings.
NOTE: After exiting the multi-function settings, the remote control will revert to
the pre-multi-function setting mode. The remote control will have no
connection with the home appliances selected. Point the remote control
at the TV set and press the "M1" button (for all kinds of home appliances).
The remote control will emit data code in this order:
"TV power"
"AV/TV"
Clear Multi-Function Button
Setting Method:
1.Under the multi-function setting mode, press the corresponding M1/M2
button. This eliminates a command button. After the multi-function button
data is cleared, the indicator light will flash three times.
2.To completely clear the multi-function button: Under the multi-function setting
mode press and release the multi-function button "M1/M2" until the indicator
light flashes three times. This shows that all functions have been cleared.
Press any button to exit.
Maintenance:
Clean the product only with a dry cloth.
Do not use cleaning solvents or abrasives.
Warranty:
Any changes and/or modifications to the product will void the warranty. We
cannot accept any liability for damage caused by incorrect use of this product.
Disclaimer:
Designs and specifications are subject to change without prior notice. All logos,
brands and product names are trademarks or registered trademarks of their
respective holders and are hereby recognised as such.
Disposal:
·
This product is designated for separate collection at an appropriate
collection point. Do not dispose of this product with household waste.
·For more information, contact the retailer or the local authority
responsible for waste management.
and switch to TV/AV.
4
..................................1132
SCHNAIDER
57
