Wall Mounting - Pur Line CHE-490 Manual De Usuario

WALL MOUNTING

1) This appliance is designed to be fixed to a wall at a minimum height of 300mm and the minimum distance
from the top of the heater to the ceiling should be 1000mm. The wall bracket must be fitted horizontally and
the cable routed to the bottom right of the heater.
2) A distance of 600mm from the bottom of the heater to the floor is recommended for optimum viewing of
the flame effect.
1: Select the wall location where you want to hang your electric fireplace heater. Mark the 2 holes for the
anchor screws.
NOTE: The holes for mounting of fireplace shall be level so that the fireplace can be mounted properly.
2: Drill 2 holes 8mm (0.3in) in diameter on the marked locations. Install the wall anchors into the holes and
gently tap them into place with a hammer until the flange of wall anchor is flush with the wall surface.
NOTE: Do not fasten the screw into the expansible tube thoroughly. The screws should protrude 10 mm.
3: Mount the fireplace on the wall.
1
FREESTANDING
1: Take the two plastic feet out of the packaging
2: Place the feet at the bottom of the fireplace with the included screws.
EN
2
12
3