nilco Combi Serie Instrucciones De Uso página 38

GB
Cleaning and replacing
brush roller and drive
belt
P
P
38
After use
● After cleaning, put on the drive belt and insert the
brush roller and bearings so that they fit accurately.
When inserting the bearing holders, make sure that
both show the same marking [P]:
1 cam
8 notches = half-worn brush roller
● Place bottom plate on housing and secure, making
sure that the levers lock into the front edge of the
housing.
Flat belt: Premium 1107, Combi 17-30
Toothed belt:
For details on brush rollers and brush bearings
see page 37.
= new brush roller
Combi 17-36, 17-46