SATA jet 4000 B Instrucciones De Servicio página 479

Operating instructions SATAjet 4000 B RP/HVLP (DIGITAL)
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use In Explosive Areas
Ex-sign Equipment cat-
egory
6.4.1 General
The spray gun is approved for the use / storage in explosive areas of Ex-
Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
6.4.2 Additional Information on the Electronic
Pressure Gauge
The electronic pressure gauge has passed a design examination. It has
been developed, constructed and manufactured in accordance with the
EU directive 94/9EU. It has been classified according to Ex ia IICT4 Ga or
Ex ia IICT4 Gb. It may be used and stored in the explosive zones 1 and
2 up to 60°C ambient temperature. Inspection authority: KEMA 05 ATEX
1090 X.
The following applications and operations lead to the loss of
the explosion protection and are, therefore, prohibited:
• Battery replacement in explosive areas!
• Removal of the front cover of the pressure display!
Device category
Danger! Risk of explosion!
Danger! Risk of explosion!
Gas category Temperature clas-
US
sification
479