Velleman DVM870 Manual Del Usuario página 6

Always use the device within its specified range.
•
Calibration and repair must be performed by a qualified technician. Refer
•
to your local dealer.
Never attempt to measure voltages when a current measuring range is
•
selected.
Features
6.
3 1/2 Digit LCD display with automatic polarity indication and settings
•
information
automatic or manual range selection
•
data hold function
•
continuity and diode test
•
peak hold function
•
auto-restore fuse (except 10A range)
•
conform with IEC1010 CAT II (residential branch circuits) 600V
•
7. Overview
Refer to the illustrations on page 2 of this manual.
1 LCD display, 3 full digits and 1 half (max. range 1999)
2 MAX: hold max value on LCD
3 SELECT: function switch
4 HOLD: lock the current reading
5 RANGE: for manual range selection
Disconnect from live circuit before changing!
6 Rotary switch: to select type of measurement
7 COM: common input terminal
8 10A: input terminal for high currents
9 VΩmA: input terminal for current <200mA and all other measurements
10 battery compartment
11 screw (4x) to open housing (located under protective cover)
12 location of fuse
13 stand
04.02.2010
DVM870
6
Rev. 01
©Velleman nv