Troubleshooting - Gima 32926 Manual Del Usuario

37

troUblEshootInG

SYMBOLS/SYMPTOMS
No power-on by pressing
button.
Measuring Error Symbol
appears when blood
pressure value displayed
is excessively low or high.
Measuring Error Symbol
Measuring Error Symbol
Measuring Error Symbol
Note: If "EP" appears on the display, just return the device to your local distributor or importer.
CONDITIONS/CAUSES
Worn-out batteries.
Battery polarities have been
positioned incorrectly.
Cuff has been placed
incorrectly.
Did you talk or move during
measurement?
Shaking of the wrist with
the cuff on.
Air circuit abnormality.
Cuff tube may not be plugged
into monitor correctly.
Inflation pressure exceeding
300 mmHg.
Error determining measurement
data.
ENGLISH
INDICATION/CORRECTION
Replace them with 2
new AAA alkaline batteries.
Re-insert the batteries
in the correct positions.
Wrap the cuff properly so that it
is positioned correctly.
Measure again. Keep wrist
steady during measurement.
Check cuff connection.
Measure again.
Switch the unit off,
then measure again.
Measure again.