Adjusting Cable Slack - NuVinci N360 Manual De Instrucciones

BASIC MAINTENANCE AND CARE

Adjusting Cable Slack

Cable slack can be adjusted
1
with the barrel adjusters (1) at the
shifter.
2 Cable slack can be determined
by pulling lightly on the cable
EN
housing (2) at the shifter and
noticing any slack.
„ 0.5-1.5mm of slack is ideal.
„ For rear wheel removal,
additional cable slack may
be desired to ease shift
cable hardware removal.
2
1
1
2
2
BASIC MAINTENANCE AND CARE
Disconnecting the Rear
Wheel
„ Shift to a position that allows
easy access to the shift cable
hardware.
3 Remove shift cable hardware
following steps A, B and C.
4 Loosen and/or remove the
axle nuts (3) and the no-turn
washers (4).
„ For roller brake applications,
disconnect the roller brake
according to the manufacturer's
instructions.
„ Remove the rear wheel.
4
4
3
3
A
B
C
3
4
EN
3