Technical Data; Accessory Tools - Permissible Diameters - Hilti SF 4-A22 Manual Del Usuario

Status
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED flashes, the power tool is not
in working order.
4 LEDs flash, the power tool is not
in working order.
Battery state of charge cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
4

Technical data

4.1 Technical data
Rated voltage
Weight including battery B22⁄8.0
Speed
Torque (soft joint)
Ambient temperature for operation
Storage temperature
4.2 Accessory tools – permissible diameters
Keyless chuck clamping range
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (hardwood)
*2253605*
Meaning
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
1st gear
2nd gear
2253605
SF 4-A22
21.6 V
5.3 lb
(2.4 kg)
0 /min ... 610 /min
0 /min ... 2,100 /min
≤ 27 ftlb
f
(≤ 36 Nm)
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
SF 4-A22
1.5 mm ... 13 mm
1/16 in ... 1/2 in
1.5 mm ... 25 mm
1/16 in ... 1 in
1.5 mm ... 14 mm
1/16 in ... 35/64 in
English 9