Tabla de contenido
Idiomas disponibles
Idiomas disponibles
thinner, dry cleaning fluids or similar
products which may seriously dam-
age plastic parts. Never let any liquid
get inside the engine; never immerse
engine into a liquid.
The following procedures must be fol-
lowed when maintenance or service is
performed on the engine.
Any service operations not included in
this section should be performed by a
Black & Decker factory service center.
Contact Blacker & Decker Service
Represtentative at 1-800-544-6986.
This engine is only for use in Black &
Decker approved applications. If used
in unapproved applications, Black &
Decker is not responsible for repairs or
damage and the warranty if void. Call
1-800-544-6986 for more information.
Procedure
Maintenance Chart
Clean air filter (3)
Check oil level
Change oil (1,2,3)
Clean spark plug
Clean engine's exterior
Check and adjust valve
clearance (.15 mm intake,
.2 mm exhaust) (2)
Clean spark
arrester (if equipped)
Clean debris screen (if
equipped)
1.
The engine oil must be changed after the first 20 hours of
operation. Thereafter change oil every 150 hours of operation or
monthly, whichever comes first.
2.
See Black & Decker shop manual for detail instructions. To order
a shop manual call 1-800-544-6986 .
3.
Perform more frequently in dusty or humid conditions
N003333
Cleaning Air Filter (Fig. 1)
burn. Engine and surrounding parts
are very hot, do not touch (see the Hot
Surfaces identified in Figure 1). Allow
engine to cool prior to servicing.
A dirty air cleaner will restrict airflow
to the carburetor. To prevent carbure-
tor mal func tion, service the air filter
regularly. Service more frequently
when operating the pressure washer in
extremely dusty areas.
mable solvent to clean the filter ele-
ment can cause a fire or explosion.
operate without air filter.
X
X
X
10- ENG
WARNING: Hot surfaces. Risk of
WARNING: Using gasoline or flam-
WARNING: Risk of fire. Do not
X
X
X
X
X
Tabla de contenido
