Operating Instructions - Stanley SHP 1900 Manual Del Propietário

ASSEMBLY INSTRUCTIONS
8
Garden Hose Adapter Installation
Attach collar of garden hose adapter (K) directly to
power washer water inlet (A). Hand tighten.

OPERATING INSTRUCTIONS

93904_16ANR029_Stanley 1900PSI ENG-FR-SP.indd 9
A
K
Attach garden hose to the garden hose adapter (K).
Note:
to garden hose adapter.
You have now completed assembly and are ready to
begin using your electric power washer. Read and
observe all safety instructions.
9
K
Flush out garden hose before connecting
• Turn on water supply at the faucet to completely
open.
• Make sure the "ON/OFF" switch is in the "OFF"
position. The power switch has international
symbols for 'on' and 'off': On (|) Off (O).
• Unwind the power cord completely and plug the
GFCI into a grounded 120 volt outlet.
• Release safety push trigger lock up and back into
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back
down to lock back into place.
9
16/12/14 下午5:47