Electrical Connection - Amica 6020GG4.23ZpQ Manual De Instrucciones

INSTALLATION

Electrical connection

Warning!
All electrical work should be carried out by a
suitably qualified and authorised electrician.
No alterations or wilful changes in the electric-
ity supply should be carried out.
The cooker is manufactured to work with
a one-phase alternating current (230V
1N~50Hz) and is equipped with a 3 x 1,5 mm
connection lead.
The electricity supply for the cooker must
have a safety switch which enables the power
to be cut off in case of emergency. The dis-
tance between the working contacts of the
safety switch must be at least 3 mm.
Before connecting the cooker to the power
supply it is important to read the information
on the data plate and the connection diagram.
Caution! The installer is obliged to provide
the user with "appliance electrical connection
certificate" (enclosed with the warranty card).
Connection diagram
Caution! Voltage of heating elements 230V.
Caution! In the event of any connection the safety
wire must be connected to the
2
Live L: BN - brown
Neutral N: BU - blue
Earth PE: GNYE -green/yellow
Power circuit should be protected with
a 16A fuse.
Recommended type of connection lead:
H05VV-F, 3 x 1,5mm
Important!
If the fixed power supply cable is damaged,
it should be replaced at the manufacturer
or at an authorized servicing outlet, or by a
qualified person to avoid danger.
49
PE terminal.
L N
.
2