ANSMANN 1700-0110 Manual De Instrucciones página 7

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
USE
> CAPACITY INDICATION
Press the power button to check the energy remaining.
ƒ ƒ
4 LEDs illuminate:
ƒ ƒ
3 LEDs illuminate:
ƒ ƒ
2 LEDs illuminate:
ƒ ƒ
1 LED illuminates:
ƒ ƒ
NO LED ILLUMINATES:
Please charge the Powerbank immediately. If the Powerbank will not be
used for an extended period of time, it is necessary to charge it before
storage in order to avoid the rechargeable battery being damaged.
> CHARGING THE POWERBANK
Insert the Micro-USB plug of the USB cable into the Micro-USB socket on
the Powerbank and the USB plug into the USB port on a computer or a
USB charger.
The charging process starts automatically. During the charging process,
up to 4 flashing LEDs indicate the status of the charging progress. After
the charging process is complete, all 4 LEDs illuminate steadily.
> CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. Insert the
USB plug of the cable into the Powerbank and the other end into your
device. The charging process starts automatically.
Please disconnect your device from the Powerbank once the charging
process is complete. The Powerbank switches off automatically if it is
not charging a device.
Please note that the Powerbank cannot be charged and discharged
simultaneously.
The Powerbank may heat up a little depending on the charge/discharge
current.
Deutsch |
Italiano | Nederlands | Dansk | Suomalainen | Norsk | Svenska
75% - 100%
50% - 75%
25% - 50%
1% - 25%
The Powerbank is
completely discharged.
English | Français | Español | Português