Timer And Sleep Operation; Setting The Wake-Up Timer; Sleep Operation - Pioneer X-HM70-S Manual De Instrucciones

Timer and sleep operation

Timer and sleep operation

Setting the wake-up timer

Timer playback:
The unit turns on and plays the desired source (CD, TUNER,
USB or iPod/iPhone) at a preset time.
Before setting timer:
• Check that the clock is set to the correct time (Setting the
clock on page 11). If it is not set, you cannot use the timer
function.
• For timer playback: Plug in USB or load discs or iPod to
be played.
1 Press STANDBY/ON button.
2 Press and hold TIMER button for more than two
seconds.
3 Press / button to select 'Timer Set' within ten
seconds, then press ENTER.
4 Select the source you want played.
Use / button to select CD, TUNER, USB or iPod/iPhone
function.
5 Press ENTER.
6 Set the day(s) of the week.
Use /button to choose the day(s).
26
En
The timer can be set as follows.
EVERYDAY SUNDAY
TUESDAY WEDNESDAY
FRIDAY SATURDAY
TUE-SAT SAT-SUN
7 Press ENTER.
8 Set the switch-on time.
O
Use /button to set the hour, then press ENTER.
Set the minute in the same way, pressing ENTER when you're
done.
9 Set the switch-off time.
Set as above, pressing ENTER when done.
10 Use /button to set the volume.
11 Press ENTER.
The TIMER indicator light, and the settings are confirmed in
the display.
12 Press STANDBY/ON to enter the power stand-by mode.
Turning the wake-up timer on/off
If you have already set the wake-up timer, you can switch it
on/off.
1 When the power is on, press and hold TIMER button for
two seconds.
2 Press / button to select 'Timer On' or 'Timer Off'
within ten seconds, then press ENTER.
When 'Timer On' is selected, the timer indicator light, and
the settings are confirmed in the display.
3 When 'Timer On' is selected, press STANDBY/ON to set
the stand-by mode.
Reusing the memorised timer setting
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1 When the power is on, press and hold TIMER button for
two seconds.
2 Press / button to select 'Timer Call' within ten
seconds, then press ENTER.
The TIMER indicator light, and the settings are confirmed in
the display.

Sleep operation

MONDAY
THURSDAY  Press SLEEP to change the amount of time before the
MON-FRI receiver switches into standby (30 min. – 60 min. – 90
min. – Off).
• You can check the remaining sleep time at any time by
pressing SLEEP once.