Tipping Aid; Suspension; Basket; Transport - Thomashilfen A chassis Advantage Manual Del Usuario

User manual – A chassis Advantage
Tipping aid (accessory)
Place your foot on the tipping aid, hold the rehab stroller with both hands, and tilt it (Fig. 13).

Suspension

The suspension is always active. It is for suitable for any body weight up to the maximum load capacity of the seat unit
and does not have to be adjusted to the child's weight.

Basket

The basket has snap hooks on both sides at the front. At the rear, it is fastened to the chassis with a zipper. Guide the
basket into the chassis from the rear. Place the fastening strap at the rear end of the basket around the crossbar of the
rear frame (Fig. 14) and fasten the basket with the zipper (Fig. 15). Then insert the basket's snap hooks into each of the
large openings on the front end of the chassis' side (Fig. 16).
The basket can be left in place when folding the chassis. However, if the chassis is kept folded over a longer period, we
recommend removing the basket beforehand to avoid warping of the bottom plate.
The basket can be washed in the washing machine at 40° C. First remove the bottom plate through the opening on the
inside of the basket; heed the care instructions.
(Maximum load capacity of the basket: 5 kg)

Transport

The EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, together with the A chassis Advantage, can be
folded up for transport in a vehicle trunk. Heed the instructions for folding the rehab wagon and use the lock for folding
to avoid unintentional unfolding (Fig. 5).
The seat unit and chassis can be separated so that their weights can be lifted separately. In this regard, please refer to
the instructions for removing the seat unit.
To ensure the simplest possible handling, use one hand to grab the seat unit on the handle on the back rest, to which
the release lever for the seat tilting is also attached (Fig. 1). With the other hand, grab the front edge of the seat. The
chassis can be lifted by holding the frame on the sides or the bent pipe which connects the left and right front frames.

Use as a seat in a motor vehicle

In combination with the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, the "Crash" version of the
A chassis Advantage has successfully passed the crash test according to the international ISO 7176/19 standard as well
as ANSI / RESNA WC 19 and can be used as a seat in a motor vehicle.
IMPORTANT: If the A chassis Advantage is to be used together with the EASyS Advantage / EASyS Advantage S / EASyS
Modular S seat unit as a seat in a motor vehicle, the following instructions are to be heeded.
Together with the A chassis Advantage, the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit has
been designed for transport in the forward direction. Whenever possible, the user should be placed on one of the vehi-
cle seats and the installed restraint system should be used.
Use only chassis / passenger restraint systems that are in accordance with ISO 10542 to secure the A chassis Advantage,
together with the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, to the floor of the vehicle.
The 4 attachment points on the A chassis Advantage are indicated by the following symbol:
NOTE REGARDING SAFETY: If the rehab stroller is used as a seat in a motor vehicle, the locking pin on the side of the
chassis must be engaged; this is also indicated by the symbol above (Fig. 17). In this way, the seat angle is locked in a
reclined position.
20