Phonic i2600 Manual Del Usuario página 17

Program Utility Submenu
This sub menu allows you to access several options related to the
management of presets stored and recallable within the unit.
Recall a Program – this page allows for the loading of a preset
program. You can store up to 50 presets in the i2600 memory.
By pushing ENTER and using the PM2 and PM3 controls, it is
possible to scroll through all currently available presets. If no
presets are stored, you will see a message saying "No Stored
Xovers". If presets are available, press enter to recall the preset
and return back to the Program Utility Submenu.
PROGRAM
Recall a Program
Store a Program – this page allows you to store all current settings
into a preset slot. By pressing the ENTER button and rotating the
PM2 or PM3 encoders it is possible to scroll through the previously
saved presets and available empty locations (identified as "Empty
Memory"). If no user presets are stored the Save a Program
screen will show empty memory locations for all 50 presets slots.
To store a preset, you must do the following:
1. Scroll through all storage locations and push ENTER to
select one.
2. You can then enter a name for the preset up to 16
characters. Use NAV/PM1 to navigate through the 16
available characters and the PM2 and PM3 encoders to
adjust the letter/number. The character currently being
adjusted will be identifiable by a blinking underscore.
3. Push ENTER to confirm the entered name.
4. Push ENTER once again to confirm the saved preset
and return to the Program Utility Submenu.
5. If you wish to overwrite a previously saved preset you
will need to push ENTER to confirm this.
PROGRAM UTILITY:
Save a Program
Delete a Program – this page allows you to delete a preset already
stored in the i2600 memory. By pressing the ENTER button and
rotating the PM2 or PM3 encoder it is possible to scroll through
all previously saved presets and the available empty locations
(identified as "Empty Memory"). If no user presets are stored, the
Delete a Program screen will show empty memory locations for all
preset locations. By using the PM2 or PM3 encoder it is possible
to select a preset to be deleted. Pressing the ENTER button on
a selected preset will bring up the "[Enter] to Delete" page with
the selected preset. Press ENTER to confirm and return to the
Program Utility Submenu.
PROGRAM
Delete a Program
i2600
UTILITY:
UTILITY:
Security Submenu
This sub menu allows the User to set the parameters shown lock
the i2600 and set a password. This will limit the unit's functions and
control to those who have access to the appropriate password.
Show Parameter – Pressing ENTER from the above menu will
access the Show Parameter Submenu. Press ENTER again and
use the PM2 or PM3 encoders to scroll between the "be shown"
and "not be shown" options. Choosing the "be shown" option
means that once the unit is locked, you cannot access parameter
editing features but they will be displayed on the LCD screen.
Choosing the "not be shown" option means that once the unit is
locked the parameters will not be shown at all.
Parameter Will
not be shown
Lock Unit – This submenu allows the user to lock the device so
no parameters can be edited or modified. When the unit is in an
unlocked condition all parameters will be available for editing.
When you select "Lock On", all parameters will be locked and are
not available for editing.
Lock Unit
Lock : Off
User Password – This menu allows you to set a password for their
i2600 when it's locked. Using the PM2 or PM3 encoders to choose
a character and the NAV/PM1 encoder to move between available
locations you can enter a 6 character password. The current
position of the cursor for the characters to be entered is shown by
a blinking underscore. Press ENTER to confirm the password. The
i2600 will then ask you to re-enter the password to confirm.
Note: the default password of the i2600 is "000000". This password
can be restored by following the Factory Reset procedure.
User Password
[
Enable Password – Once a Password has been entered into the
i2600 through the steps described in the previous paragraph it is
possible to "Enable" or "Disable" the password function. Enabling
the password function will lock the i2600, thus restricting access to
all functions. When a password has been entered you will be able
to select the "Enable" option from the menu and the unit will not be
accessible for editing. If no password has been set, you will not be
able to change the status of this option.
When the "Locked by Password" option is selected, all i2600
functions are unavailable to the user. This includes use of all
MUTE buttons. The only access available is to the parameters of
the input output channels accessible by pressing the edit button
ONLY to READ the values no editing possible if the "be shown"
flag in the "Show Parameter" submenu has been selected. Once
"Locked by Password" is set, a "keylock" icon will appear on the
default LCD screen and no menu pages will be accessible with the
exception of the "User Password" option.
To regain access to the full operation of the i2600, press the
UTILITY button to access the "User Password" screen. After the
correct password has been entered you will have full access the
i2600 once again and the "keylock" icon will disappear from the
main screen. The "Enable Password" option will be reverted back
to "Disable".
*
]
13