Phonic i2600 Manual Del Usuario página 15

10.1b.2. If selected a Custom_3rd filter
Output[x] LPF
[Name]
->Custom_3rd F = 250Hz
→ Filtx F= 250Hz Q = 0.3
10.1b.3. If selected a Custom_4th filter
Output[x] [Name] LPF
->Custom_4th F = 250Hz
→ Filtx F= 250Hz Q = 0.3
Once editing the Cells "Filtx", pressing the Enter Button can be accessed also for the Custom Filters the page for the fast
frequency setting, as available for the NOT Custom Filters and which way of working is described at the point 10.1a.
11. Out-[x] EQ-[x] (X from 1 to 4)
Byp = Off Type = Y (Y = Peaking_Eq, Hi-Shelv_Q, Lo-Shelv_Q, Lo-Pass_Q, Hi-Pass_Q, All Pass_2)
-> Byp = Off Type = Y
Through the PM2, it is possible to Byp the single selected filter.
Through the PM3, it is possible to select one of the 17 available
filters' type.
Once selected the filter Type and NOT in Byp mode, pressing
again the ENTER button can be accessed the selected filter's editing page.
11.1 Out-[x] EQ-[x] (X from 1 to 4)
-> Byp = Off Type = Y
11.1a. If you selected a Peaking_Eq filter, then the filter can be set by
the following parameters
Out-[x] EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
11.1b. If you selected a Hi-Shelv_Q (variable Q High Shelving) filter,
then the filter can be set by the following parameters
Out-[x] EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
11.1c. If you selected a Lo-Shelv_Q (variable Q Low Shelving) filter,
then the filter can be set by the following parameters
Out-[x] EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
11.1d. If you selected a Lo-Pass_Q (variable Q Low Pass) filter,
then the filter can be set by the following parameters
Out-[x] EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz ----- Q=1.00
i2600
Ord Cell x ] x=1 [Freq.] 20Hz
[2
nd
:
[Q not available] x=2
Ord Cell x ] x=1 [Freq.] 20Hz
[2
nd
:
x=2
PM1 N/A Off
:
On
[Freq.] 20Hz [Amp.] -12.0 dB
:
20kHz
[Freq.] 20Hz [Amp.] -12.0 dB
:
20kHz
[Freq.] 20Hz [Amp.] -12.0 dB
:
20kHz
[Freq.] 20Hz [Amp.]
:
[Q] 0.05
: :
20kHz 10.00
[Q] 0.05
: :
20kHz 10.00
Peaking_Eq
:
Notch Filt
0.30
[Q]
: :
+12.0 dB 20.00
[Q] 0.30
: :
+12.0 dB 20.00
0.30
[Q]
: :
+12.0 dB 20.00
----- [Q] 0.30
: :
11