Phonic i2600 Manual Del Usuario página 10

6. Input A/B Sel EQ
Select EQ = GEQ 15 bands
-> Select EQ = GEQ 15 Bands
7. Input A/B EQ Byp
EQ Bypass = Off
-> EQ Bypass = Off
8. The Menu 8 accessing the Filters paramenters, changes depndently form the EQ selected at the step 6:
Graphic 15 Bands OR Parametric 7 Bands
If the "GEQ 15 Band" option is select in point 6 AND set to Bypass OFF in point 7.
8.A. Input A/B GEQ
Graphic Equalizer (The 15 available filters are all Peaker ones with fixed Q=2.2, for granting the 2/3 of Oct width,
+-12dB att/gain range and centered at the following frequenices: 25Hz, 40Hz, 63Hz, 100Hz, 160Hz,
250Hz, 400Hz, 630Hz, 1kHz, 1.6kHz, 2.5kHz, 4kHz, 6.3kHz, 10kHz, 16kHz)
-> 25Hz 0.0dB Q=2.2
-> 16kHz 0.0dB Q=2.2
If the "PEQ 7 Band" option is selected in point 6 AND set in Bypass OFF in point 7.
8.B. Input A/B PEQ[x] (X from 1 to 7, selectable through the PM1 Encoder)
Parametric Equalizer
8.B.1 Input A/B PEQ [x]
-> Byp = Off Type = Y
8.B.1a. If you selected a Peaking_Eq filter, then the filter can be set by
the following parameters
Input A/B PEQ[x] (up to 7 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
8.B.1ab Input A/B PEQ[x]
[Freq]
-> Edit Freq = 1000Hz
8.B.1b. If you selected a Hi-Shelv_Q (variable Q High Shelving) filter,
then the filter can be set by the following parameters
Input A/B PEQ[x] (up to 7 filters available)
[Freq] [Gain]
-> 1000Hz +0.0dB Q=1.00
6
PM1 N/A
PM1 N/A
25Hz
..:
16kHz
(Byp can be set On or Off through the use of the PM2 Encoder)
(Y = Peaking_Eq, Hi-Shelv_Q, Lo-Shelv_Q, selectable through the PM3 Encoder)
[Freq.] 20Hz
PM1 N/A
[Q]
[Freq.] 20Hz
GEQ 15 Bands
PEQ 7 Bands
Off
On
-12dB
:
+12dB
-12dB
:
+12dB
[Amp.] -12.0 dB
: :
20kHz [1Hz Step] +12.0 dB
[Freq.] 20Hz
:
20kHz [10Hz Step]
[Amp.] -12.0 dB
: :
20kHz [1Hz Step] +12.0 dB
Same as PM2
Same as PM2
Same as PM2
:
Same as PM2
Same as PM2
:
Same as PM2
[Q] 0.30
:
20.00
[Freq.] 20Hz
:
20kHz [1Hz Step]
0.30
[Q]
:
20.00
i2600