Set Header; Test Counter; Config Printer; Main Menu - Midtronics MicroXL Serie Manual De Instrucciones

GB
F. Set Header
You can create a header for your printed test results showing your
store name, address, and phone number. Use the ARROW buttons
to scroll to the desired character and press the ENTER button to
select and move to the next space. Continue until you have entered
all of the information. The INFO button will move the cursor back
one space. Exit by entering the last available character or by
pressing the MENU button to return to the Menu screen.
G. Test Counter
The analyzer automatically counts the total number of tests
performed, the number of tests by type, and the number of results
by type. Press the ARROW buttons to scroll through the 3 test
counter screens: Total Tests, Out-of-Vehicle, and In-Vehicle.
Abbreviations: G: Good Battery, G-R: Good-Recharge (Battery),
C&R: (Charge & Retest (Battery), R: Replace Battery, FS: Full
System Test, TT: Total tests in screen category (Total Tests, Out-
of-Vehicle, In-Vehicle).
Press ENTER to return to the UTILITIES menu.
H. Config Printer
This utility allows you to set the communication protocol in the
Midtronics printer to enable communication between the printer and
the MicroXL. You can also use the MicroXL Config Printer utility to
set the printer's protocol for older model Micro analyzers.
1. Turn on the printer.
2. Select H. Config Printer.
3. Select IRDA or HP82240B. (IRDA is recommended for the
MicroXL series analyzers.)
4. The printer will reset and print the protocol it will be using.
NOTE: Printing may take approximately 20 seconds. Be sure
to keep the analyzer's IR transmitter aligned with the printer's
receiver until the full configuration message prints.
I. Main Menu
Select this utility option to return to the first option, 1. PRINT
RESULTS, in the Main menu.
E
NGLISH
17
• •