3. INSTRUCTIONS FOR USE
1
Clip one fastening adhesive to
Somnibel
a
device until you hear a
"click" (the light blinks 3 times in
green and the device vibrates).
3
Remove the protective cover
from the adhesive.
5
Lie down for sleeping.
7
Dispose the fastening
adhesive and its cover.
9
When the light turns off, the device battery is fully charged and it can be disconnected from mains.
EN 11
s mnibel
s mnibel
s mnibel
10
When not in use, store the device and accessories into its packaging.
somnibel
User's Manual
2
Pay
attention
"click"
indications of the device after
turn ON (consult section VISUAL
INDICATIONS AND WARNINGS).
4
Pay attention to the correct
orientation
indicated
arrow at the label of the device.
Place the device and ahesive to
the forehead or chest.
6
On the next morning, remove
the fastening adhesive from the
skin and unclip it from the device
(check that the green light blinks
twice).
8
Connect the device to the
mains by means of the battery
charger. Check that the light
turns on green.
to
the
by
an
534-800-MUM_Rev.1.06