Sibelmed Somnibel Manual De Uso página 32

somnibel
User's Manual
Accessories should be handled by their strongest parts, which are the connectors. They should also not get
wet or exposed to very abrupt changes of temperature. Do not apply excessive stress to the accessories. In
particular, avoid pulling or bending any part of the cables.
Do not disconnect the accessories from the device by pulling the cable. You can damage the product or accessories
reducing the product's safety. Hold always the connectors when disconnecting the device.
Deteriorated accessories (battery charger with broken case, cable or connector) should not be used since there
is risk of cramps. Contact SIBEL S.A.U. or your provider for acquiring new ones.
Deteriorated fastening adhesives (excessively wrinkled or partially removed from the protecting cover) should
not be used since their adhesiveness may be reduced. Dispose defective adhesives and use a new one.
In case of device overheating during battery charge or during use, immediately disconnect it from the mains
and stop using the device. Contact SIBEL's After Sales Service or your dealer.
Fastening adhesives are intended for single-use. Do not reuse the adhesives since their adhesiveness is
considerably reduced after the first use. Use always a new adhesive for each treatment session.
The cleaning instructions in this manual must be carefully followed.
No parts are allowed for temporary immersion. IT MAY CAUSE ELECTRIC DISCHARGE.
The detection of body position and the generation of vibrating stimulus are considered essential operation (so
that the specified accuracy can be met), as well as the attachment of the device to the patient's body and the
visual indications.
Somnibel
The device is prepared to work at room temperature. Avoid exposing any part of the device or accessories
EN 7
534-800-MUM_Rev.1.06