ENGLISH
7
SPARE PARTS
For operation we advise you to have spare parts in
store. See table B in the appendix.
8
TECHNICAL INFORMATION
•
For the technical specifications, see table C in the
appendix at the back of this book.
9
INSTALLATION OF ACCESSORIES
9.1 Flue (pag. 2)
The heater is provided with a flue connection.
1.
Fit the flue (B) in the flue connection (C) of
the heater.
CAUTION
The flue must point upwards. Never place
the flue horizontally. An angle of 90° is
acceptable. The minimum length of the
flue is 1000 mm.
2.
Fit a rain cover (A) at the end of the flue for
outside use.
9.2 Diameter of the flue connection
ISA 65
180 mm
9.3 Outlet hose
An outlet hose must be fitted to the outlet of the heater,
in order to blow heated air to a remote area away from
the heater.
CAUTION
Check the temperature resistance of the
used hose.
Please contact the dealer for information about maxi-
mum lengths of outlet hoses, bends, distribution pipes
and hose clamps.
9.4 Room thermostat
See the instructions of the room thermostat.
10
EC DECLARATION OF CONFORMITY
For the EC declaration of conformity, go to www.
thermobile.nl.
ISA 65
40.021.073-rev00-2014
23