FEIG Electronic Sensors Instrucciones De Manejo página 36

P. Setting Function
range
d 0 ... 2 Detection direction
.
h 0 ... 6 human filter
.
u 0 ... 6 vehicle filter
.
C 0 ... 3 Cross traffic
.
suppression
*) Due to the complexity of movements and the variety of objects to be detected, the function of the human
filter, the vehicle filter and the cross traffic suppression cannot be guaranteed in all cases.
**) Both human and vehicle filters are deactivated in the factory settings. Thus all objects are detected,
depending on the selected sensitivity.
FEIG ELECTRONIC GmbH
This parameter specifies whether the motion detector reacts
to approaching or departing objects.
0: off
1: approaching
2: departing

If the vehicle or human filter is activated, only the
approaching detection direction is allowed! Modifications to
the detection direction setting will then be blocked.
This parameter specifies the probability with which
exclusively persons and not vehicles are detected.
*)
0: deactivated
1: low (persons and vehicles)
....
4: medium
....
6: high (only certainly detected humans)

The human filter can only be activated if the approaching
detection direction has been set.
This parameter specifies the probability with which
exclusively vehicles and not persons are detected.
*)
0: deactivated
1: low (vehicles and persons)
....
4: medium
....
6: high (only certainly detected vehicles)

The vehicle filter can only be activated if the
approaching detection direction has been set.
Cross traffic to the motion detector can be suppressed. This
parameter specifies the cross traffic suppression detection
accuracy.
*)
0: off
1: low
2: medium
3: high
Page 36 of 97
Manual
Description / note
MWD BP_Handbuch_mehrsprachig_10.doc
MWD BP
Factory
setting
1
0
**)
0
**)
0