Opening Parameter Mode; Closing Parameter Mode; Changing Parameters - FEIG Electronic Sensors Instrucciones De Manejo

9.1 Opening parameter mode

Symbol Key
i i
1.
-Button
2a. 1..4 Value 1..4
or
Volume +
2b.
Volume -
3b. On/Off

9.2 Closing parameter mode


Parameter mode is automatically closed 60 seconds after the last keypress on the remote control.
Symbol Key
1. On/Off

9.3 Changing parameters

Before changing parameter values you have to open the parameter entry as described in 9.1.
Symbol Key
Volume +
1.
Volume -
2. On/Off
Volume +
3.
Volume -
4a. On/Off
or
4b. On/Off
5. On/Off
FEIG ELECTRONIC GmbH
Manual
Key-
Description
press
Channel 1: displayed address
short
Channel 2: displayed address + 1
Direct confirmation
short
of device address
short
Select address value
Indirect confirmation
short
of device address
Key-
Description
press
Close parameter entry
long
from standard parameter menu
service parameter menu
Key-
Description
press
Change parameter name
short
(long)
(long: quick selection)
Return to display
short
parameter value
Change parameter value
short
(long)
(long: quick selection)
short
Undo changes
long
Save new parameter value
Return to display
short
parameter name
Page 34 of 97
Action
Actual device address is
displayed with blinking digit and
decimal point
Display first parameter name
Increment or decrement value.
Changed values doesn‟t blink !
Display first parameter name
Action
display off
Action
Display parameter name with
character and decimal point.
Actual parameter value is
displayed without decimal point.
Display changed parameter value
with blinking decimal point.
Display actual parameter value
again (without decimal point)
Decimal point expires after
successful saving.
Display parameter name with
character and decimal point.
MWD BP_Handbuch_mehrsprachig_10.doc
MWD BP
Display
Example
1.
L.
2.
F
L.
Display
Example
Display
Example
d.
P.
1
2.
0.
1
2
d.