Handling And Operation; Operating Elements; Time - Beem 03597 Manual De Instrucciones

EN

Handling and Operation

Operating Elements

The device has the following operating elements:
Operating element
Rotary knob (3)
Button
Buttons
Tare button (9)
• Each program features an LED light which indicates that it has been selected. You can turn
the rotary knob to switch between the different programs.
• To change the values faster, the
•
If the carafe (8) is removed from the main device (13) while water is being dispensed, this dis-
pensing is stopped automatically. If the carafe is placed back into the main device within around
30 seconds, the dispensing of water is resumed. If this is not done, the process is aborted.

Time

As soon as the mains plug is plugged into a plug socket, the display (2) fl ashes three times with
all indications lit up. A beep then sounds and the time display "00:00" fl ashes up. The clock has
a 24-hour time format.
1. Use the and
2. Press the button (4) to switch to the minutes.
3. Use the and
4. Press the button to confi rm the set time. The device switches to Brew Mode A / M and
"0 g" is shown on the display.
The time is saved until a new time is set or the device has been disconnected from the
mains power supply.
5. To change the set time, turn the rotary knob (3) to the Program position (preset time).
6. Hold down the
7. Perform steps 1 – 3.
8. Press the button to confi rm the changed time.
03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 32 03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 32
(4)
and (5)
and
buttons (5) to set the hours.
buttons to set the minutes.
button for around 3 seconds. The time indicator fl ashes on the display.
Function
Select a program
Confi rm (setting the time)
Start / end process
Switch to time display
Increase or reduce value (by 1 in each case)
Set scale to "0" (Tare function)
buttons can be held down.
32
18.12.2018 10:50:06 18.12.2018 10:50:06