Before Use - SOLAC ProMixter Inox 1500W Instrucciones De Uso

ENGLISH
DESCRIPTION
A Cup
B Lid
C Sealing lid ring
D Jar
E Blade set
F Sealing Blade ring
G Blade fixing ring
H Motor body
I Speed selector knob
J Pulse / Ice crush function
USE AND CARE:
Fully extend the appliance's power cable be-
•
fore each use.
Do not use the appliance if its accessories are
•
not properly fitted.
Do not use the appliance if the accessories
•
attached to it are defective. Replace them im-
mediately.
Do not use the appliance while the jug is emp-
•
ty.
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
Do not turn the appliance over while it is in use
•
or connected to the mains.
Do not force the appliance's work capacity.
•
Respect the MAX level indicator.
•
When using hot liquids do not fill the jug more
•
than half way. At all times, when mixing hot liq-
uids in the jug, select the slowest speed on the
speed selector.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Keep the appliance in good condition. Check
•
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the appli-
ance from operating correctly.
Never use liquids that are boiling or ingredients
•
whose temperature exceeds 80ºC.
Do not use the jar immediately after taking it
•
out of the dishwasher or the refrigerator, en-
sure that the jar is at room temperature.
Check that the lid is closed properly before
•
starting the appliance.
Do not use the appliance for more than 1 min-
•
ute at a time. In case of operate in cycles; al-
low the appliance a resting period of at least 2
minutes between each cycle. Under no circum-
stances should the appliance be operated for
more time than necessary.
Do not use the appliance with frozen goods or
•
those containing bones.
CAUTION: Do not use the appliance if the
•
glass is cracked or broken.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all products' packaging has
•
been removed.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
Extend the cable completely before plugging
•
it in.
Ensure the blade fixing ring is fixed properly
•
to the jar (by turning counter clockwise) be-
fore putting on the motor body. (Fig.1).
Place the jar onto to the motor unit until it fits
•
properly into place (Fig.2).
Put the ingredients, after having first chopped
•
them into small piece, into the jar with liquid
(do not exceed the maximum marker).
Put the lid on the jar; make sure it is properly
•
fixed in place.
Put the cup in the lid.
•
Connect the appliance to the mains.
•
Turn the appliance on, by using the selection •
knob.
The pilot light comes on.
•
If you wish to add more ingredients pull out
•
the cup.
Add the ingredients and replace the cup.
•
To stop the appliance set the speed back to
•
"0".
To avoid a fierce start up of the fan, it is advis-
•
able to start off from the lowest speed position
and, once the fan has been switched on, pro-
gressively increase the speed to the desired
position.
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
•
by using the speed regulator control (I). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
EN