Measuring Blood Pressure - Beurer BC 57 Instrucciones De Uso

The hours flash on the display.
• Select the desired hour using the
memory button M and confirm with
the START/STOP button
The minutes flash on the display.
• Select the desired minute using the
memory button M and confirm with
the START/STOP button
The Bluetooth symbol flashes on the display.
®
• Use the memory button M to select whether
automatic Bluetooth
®
(Bluetooth symbol flashes) or deactivated (Blue­
®
tooth symbol is not shown) and confirm with the
®
START/STOP button
Bluetooth transfers will reduce the battery life.
®
.
.
data transfer is activated
.

5. Measuring blood pressure

Attaching the cuff
1 2
• Expose your left wrist. Ensure that the circulation of the
arm is not hindered by tight clothing or similar.
Place the cuff on the inside of your wrist.
• Close the cuff with the hook-and-loop fastener such
that the upper edge of the device is positioned approx.
1 cm underneath the heel of the hand.
• The cuff must be fitted tightly around the wrist, but must
not constrict.
Adopt the correct posture
• Before every measurement, relax for about five min-
utes. Otherwise deviations can occur.
• You can take the measurement
while sitting or lying. To take your
blood pressure, make sure you are
sitting comfortably with your arms
and back leaning on something.
Do not cross your legs. Place your
27
3