Closed-Captioning - Sanyo DS13320 Manual Del Propietário

QuickTips
If Caption Text mode is
selected and no
captioned text is broad-
casted, a black box
may appear and
remain on the TV
screen.
To remove this black
box, set captioning to
any mode other than
T1 (Text1) or T2
(Text2) or press the
key to cancel
RESET
captioning and cus-
tomized settings.
Channel number con-
tinuous display mode is
not available when
captioning is on.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
10

CLOSED-CAPTIONING

Captioning is textual information transmitted along with the picture and sound so it can be
displayed on the TV screen. Because different types of captions can be transmitted with
the TV signal, separate captioning modes are provided. The captioning modes recognized
by this model are: C1 (Caption1), C2 (Caption2), T1 (Text1), and T2 (Text2). Local broad-
casters decide which captions signals to transmit. They may not choose to provide captions
or may provide captions in one or all of the available modes.
C1: This is the main mode used for program captioning
(words match the program you are watching). Almost all
broadcasters will use Caption1 to transmit program captions.
These captions are generally one or two lines.
C2: This is an alternative mode for program
captioning. Caption2 may be used by the broadcaster to
provide captions in another language, such as, Spanish or
French.
T1: This mode is used to display large amounts of text. This
text will appear within a black box that may be nearly as
large as the TV screen. Text displayed in this manner does
not generally relate to the program. These captions may be
used by broadcasters to provide weather reports, community
bulletins, stock quotes, etc.
T2: This is an alternative mode used to display large
amounts of text. The same types of information displayed
in Text1 can be displayed in Text2.
QuikCap: QuikCap allows captions to toggle on and off with the Mute function. For
example, the phone rings; you press the MUTE key on the remote control to block the TV
sound; the captions display automatically. When you finish your conversation and press the
MUTE key again to restore the sound, the captions will disappear.
QuikCap displays program captions in the C1 (Caption1) mode.
SETTING CAPTIONS
1. Press the CAPTION key on the remote control.
2. Use the 0 key to select OFF, C1 (Caption1), C2 (Caption2),
T1 (Text1), T2 (Text2), or QuikCap.
TWO OUTS AND TWO STRIKES
C1 / C2
TONIGHT: BECOMING MOSTLY
CLOUDY WITH A 40 PERCENT
CHANCE OF RAIN. COLD WITH
A LOW IN THE UPPER 30's WEST
WIND AROUND 20 MPH, SHIFT-
ING TO NORTHWEST AROUND
MIDNIGHT. FRIDAY: MOSTLY
CLOUDY AND COLDER WITH
A 50 PERCENT CHANCE OF
RAIN. HIGH IN THE MID 50's.
T1 / T2
POWER
GAME
RESET
(INPUT)
MENU RECALL
CH
VOL VOL
MUTE DISPLAY
2 3
1 2 3
1
4 4 5 6
5 6
7 8 9
7 8 9
CAPTION SLEEP
0
0