Technical Data; Ec Declaration Of Conformity; Operators Manual - Husqvarna Automower Connect 4G/2G Manual De Usuario

Problem with the connection to the
Internet server.
Problem with the SIM card or the module.
1.4 Operation
1.4.1 Main menu
Dashboard : Shows the current status of the
•
product. It shows symbols for the battery status
and cutting height.

1.5 Technical data

Frequency Band Support
®
Automower Connect 2G
®
Automower Connect 4G
Power Class
®
Automower Connect 2G
®
Automower Connect 4G

1.6 EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the communication kit with
serial numbers dating 2020 week 40 and onwards (the
year and week is clearly stated on the rating plate,
followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVES as listed
below including applied standards.
• Directive on "restriction of use of certain hazardous
substances" 2011/65/EU.
• EN IEC 63000:2018
• Directive "relating to radio equipment" 2014/53/EU.
Safety
• EN 62368-1:2014+A11:2017
• Electromagnetic compatibility:
• ETSI EN 301 489-1 V2.2.3
• ETSI EN 301 489-19 V2.1.1
• ETSI EN 301 489-52 V1.1.1
• Efficient use of the spectrum:
1529 - 001 - 08.09.2020
•
•
1.4.2 My mowers
My mowers shows the status of the product, you can
remove or add products paired to the account.
GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
Band 12 (700 MHz), Band 17 (700 MHz), Band 28 (700 MHz), Band 13 (700 MHz),
Band 20 (800 MHz), Band 26 (850 MHz), Band 5 (850 MHz), Band 19 (850 MHz),
Band 8 (900 MHz), Band 4 (1700 MHz), Band 3 (1800 MHz), Band 2 (1900 MHz),
Band 25 (1900 MHz), Band 1 (2100 MHz), Band 39 (1900 MHz)
Power Class 4 (for GSM/E-GSM)
Power Class 1 (for DCS/PCS)
Power Class 3
Map : Shows the current position of the product and
the set centerpoint for GeoFence. You can monitor
the movement of the product with this function, for
example in case of theft.
Messages (only available for Bluetooth
range connectivity): In this menu the fault and
information messages can be found. For some of
the messages, there is information to help you to
correct the fault.
33 dBm
30 dBm
23 dBm
• ETSI EN 301 908-1 V11.1.1
• ETSI EN 301 908-13 V11.1.2
• ETSI EN 301 511 V12.5.1
• ETSI EN 303 413 V1.1.1
®
short-

Operators manual - 3