Clatronic DBS 2825 Instrucciones De Servicio página 31

5....-05-DBS 2825 Neu
Warning: The steam is hot! There is a danger of scalding!
You can set the desired quantity of steam with the steam regulator (9). With the
steam jet button (2) you can produce a short powerful jet of steam or a perma-
nent jet of steam by locking the fixing device (3) in place.
3. The iron has an anti-drip function.
4. The water tank can be replenished with water. First turn operating switch II to 0.
Operating switch I remains switched to I.
Note: If there is still some residual pressure in the water tank, a safety lock pre-
vents the water tank catch (7) from being opened. The residual pressure first
has to be relieved before the device can be safely opened.
5. With the steam jet button you can now release the residual steam pressure.
When no further steam comes out of the iron sole plate, turn operating switch I
to 0. Then please remove the mains plug and carefully open the water tank lock
(7).
Warning: The steam is hot! There is a danger of scalding!
6. With the help of a funnel fill freshwater from a measuring beaker into the water
tank. Do not overfill! Take care of water splashes that might come out of the
boiler. In order to prevent the water from splashing it should be filled into the
funnel slowly after the safety lock has been opened.
7. Fasten the safety lock again.
8. Insert the power plug back into the socket.
Note: Never open the water tank lock while the device is being operated.
When ironing at low temperatures, please ensure that you reduce the quantity of
steam or iron without steam altogether.
Vertical Steam
This can be used to produce a jet of steam in a vertical direction.
Self-Cleaning
Any lime residues which form in the sole plate are automatically removed due to
the heat and steam pressure.
• Always remove the mains lead before cleaning!
• Wait until the machine has cooled down completely.
• Clean the casing with a slightly damp cloth.
• Clean the sole plate and the rest with a slightly damp cloth. Do not use any
abrasive cleaning agents!
• Any residual water can remain in the water tank, but should be poured out if it
has been in the tank for a prolonged period.
13.01.2004 9:28 Uhr
Cleaning
Seite 31
GB
31