Remote Controller Sleep Function; Important - WowWee FlyTech SKYHOPPER Manual Del Usuario

Remotecontrollersleepfunction
2 . Insert the charger cable into the
socket located on the underside of
Skyhopper, as illustrated .
NOTE: Verify that Skyhopper is
turned OFF before recharging it .
3 . Switch the power switch on
the remote controller to ON . If
Skyhopper is charging properly
the LED charge indicator to the
right of the power switch will
light up green and remain lit .
4 . When Skyhopper is fully charged the LED charge
indicator will blink repeatedly .
IMPORTANT: Do not turn Skyhopper on until you
have removed the charger cable .
R emot e  cont r olle rsle e p f un c tio n
The remote controller is equipped with a sleep function . The LED power indicator will
turn off when the controller is idle for more than 2 minutes .
To turn the LED power indicator back on, slide the power switch on the remote
controller to OFF and then back to ON until the LED power indicator lights up again .
8
ON OFF