Rds Operations - Clarion DB248R Manual De Instrucciones

RDS Operations

RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broad-
cast station being received (PS) and can auto-
matically switch to the broadcast station with the
best reception as you move long distances (AF
switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and inter-
ruption of the station being received with traffic
information from other stations (TP). This func-
tion is not available in some areas.
When using the RDS function, always set the
radio to FM mode.
• AF : Alternative Frequency
• PS : Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP : Traffic Programme
∗ RDS interrupt does not function during AM radio
reception.
AF function
The AF function switches to a different fre-
quency on the same network in order to main-
tain optimum reception.
∗ The factory default setting is "ON".
●Switching OFF the AF function
Press the [AF] button. "AF" in the display goes
off and the AF function turns off.
●Switching ON the AF function
Press the [AF] button. "AF" in the display lights
and the AF function turns on.
∗ If the reception of the current broadcast station
deteriorates, "SEARCH" appears in the display
and the radio searches for the same programme
on another frequency.
Note:
• The AF mode can only be turned on and off in the
RDS mode.
REG (Regional programme) function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is "OFF".
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
●Switching the REG function ON
Press and hold the [AF] button for 1 second or
longer.
"REG" in the display lights and the REG function
turns on.
●Switching the REG function OFF
Press and hold the [AF] button for 1 second or
longer.
"REG" in the display goes off and the REG func-
tion turns off.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broad-
cast of the same network is received.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗ This function can only be used when "TP" is lit in
the display. When "TP" is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
●Setting the TA standby mode
If you press the [TA] button when only "TP" is lit in
the display, "TP" and "TA" light in the display and the
unit is set into the TA standby mode until a traffic an-
nouncement is broadcast. When a traffic announce-
ment broadcast starts, "TRA INFO" appears in the
display. If you press the [TA] button while a traffic an-
nouncement broadcast is being received, the traffic
DB248R/DB148R/BD149RG
13