HIKOKI WM 14DBL Instrucciones De Manejo página 9

CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
SPECIFICATIONS
POWER TOOL
Model
Electronic pulse mode
Self drilling screw mode Self drilling screw
Capacity
Electronic clutch mode
Tightening torque
[when fully charged
at 20°C temp]
Edge shape
Motor
No-load speed
[when fully charged
at 20°C temp]
Number of blows
[when fully charged
at 20°C temp]
Rechargeable battery
Dimensions of the tool
Entire length × height × center height
Weight
LED light
Remaining battery indicator lamp
CHARGER
Model
Charging voltage
Weight
Wood screw
Ordinary bolt
Bolt mode
High tension bolt
Woodwork drilling
Drill mode Steel drilling
Mortar drilling
Small screw
Bolt mode
[Tightening time: 3 sec.]
Drill mode
Electronic clutch mode
Electronic pulse mode
Bolt mode
Self drilling screw mode
Drill mode
Electronic clutch mode
Electronic pulse mode
Bolt mode
Self drilling screw mode
UC18YRSL
14.4 V 18 V
0.6 kg
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
WM14DBL
ø 4.2 × 75
M4 – M10
M4 – M6
Maximum 30 N·m
{306 kgf·cm}
Tightening is M10 high tension bolt
(strength grade 12.9) Hexagon socket used
11 N·m {112 kgf·cm}
5-point clutch 2.3 – 5.3 N·m {23 – 54 kgf·cm}
Width across flat 6.35, bit insertion shape
DC motor
0 – 1100 min
0 – 640 min
0 – 1100 min
0 – 1100 min
0 – 450 min
0 – 1090 min
0 – 1090 min
0 – 1090 min
BSL1430: Li-ion 14.4 V
(3.0 Ah, 8 cells)
162 mm × 250 mm × 31 mm 162 mm × 252 mm × 31 mm
(BSL1430 attached)
1.5 kg (BSL1430 attached)
White LED
Red LED
English
WM18DBL
ø 6
ø 21
ø 10
ø 6
M6
Maximum 33 N·m
{337 kgf·cm}
-1
-1
-1
-1
-1
-1
-1
-1
BSL1830: Li-ion 18 V
(3.0 Ah, 10 cells)
(BSL1830 attached)
1.7 kg (BSL1830 attached)
8