Tabla de contenido
F2
F3
F4
26
English
8. Operation
■ STARTING ENGINE
1. Rest the unit on a flat, firm place.
2. Pump the primer until fuel flows out in the clear tube.
(1) Primer
3. Move the choke lever upward to close the choke.
(1) Choke lever
(2) Close
(3) Open
4. Holding the blower handle, pull the starter rope with
your right hand. (Throttle lever in idling position.)
NOTE
Avoid pulling the rope to its dead end or returning it by
releasing the knob. Such actions can cause starter
failures.
5. When the engine has started, move the choke lever
gradually downward to open the choke.
6. Allow the engine to warm up for a half minute before
starting operation.
■ RESTARTING ENGINE WHILE ENGINE IS HOT
1. When restarting the engine immediately after
stopping it, leave the choke open.
2. If the engine won't start after several attempts, close
the choke and repeat pulling the rope or remove the
spark plug and dry it.
Tabla de contenido
